Celine has graciously offered this hanger swirl tutorial for those of you who are interested. Celine makes amazing soaps (I know firsthand) and they are stunning, too! Please go visit her site to peruse her art: www.iamhandmade.com
____________________________
The Hanger Swirl Technique by Celine Blacow (Ireland):
This technique allows you to incorporate an advanced design in your
cold process soaps very simply and easily, with equipment easily found in most
houses.
What do you
need? Firstly make up your usual cold process soap formula to the soap batter
stage. Divide it into at least two
colours, in the example shown, Adam + Eve, we’ve used a very classic
combination of black and white.
Contrasting colours work best with this technique, however, you could
get a very interesting combination from colours within the same range (consider
using this technique as an add on to the gradient layers technique shown
earlier on this blog from Emily Shieh).
There are 9
basic steps in working with the Hanger Swirl Technique:
1
Prepare
your soap as you normally would but choose a fragrance or essential oil and a
formulation that allows you time to play around with your soap – possibly not
the best time to try that new fragrance oil or your extra spicy essential oils!
2
Choose
your colours - you’ll need a minimum of two colours and highly contrasting
colours work really well together. You
can, however, choose as many colours as you wish … in this example of my Adam +
Eve soap, I choose a classic combination of black and white.
3
Have
your jugs of coloured soaps ready and pour in equal sized layers. The more layers, the more definition you
should achieve. Five or six layers are
probably best, with two being the minimum.
4
Once
you have each layer poured, take your hanger.
The hanger you’ll use is a regular wire hanger, the kind you get with
your dry cleaning. A plastic coated wire
hanger would be even better. Bend and
shape this so that it fits your mould perfectly, length and height wise.
5
Bang
your mould to allow any bubbles to rise to the top and then you’re ready to use
your hanger. Place it at the longest
side of the mould furthest away from you.
Push the hanger down into the mould, pushing lightly against the side of
the mould. When you reach the bottom of
your mould, move the hanger fractionally towards you, keeping it at the bottom
of the mould. Then pull the hanger up, keeping it nice and straight and slowly
drag it up through the layers of your soap.
6
When
you reach the top, move it fractionally towards you again and then push it down
slowly back into the soap, keeping it nice and straight and moving slowly.
7
Move
it fractionally closer towards you when it’s at the bottom of the mould, and
then pull it up again, slowly dragging it up towards the top.
8
Repeat
until you have reached the other side of the mould. Depending on the width of your mould, you
might have to do the push/pull technique four or five times. You can repeat it going back in the other
direction, if you like.
9
Once
you’ve finished, knock off any excess soap off the hanger and place it
carefully in your sink for washing up later.
Then work on the top of the soap as you’d normally do.
The images
below show both the layers and how the hanger has broken through the layers to
create this swirl.
It’s a
really easy technique if you prep everything really well beforehand.
Key things
to keep in mind:
·
Work
with a well behaved FO or EO
·
Work
with a well behaved soap formulation that allows you time to play
·
Move
slowly through the swirl – not so slow that the soap sets up but slow enough it
helps you get the best definition in your swirls
·
Choose
highly contrasting colours for the best effects
·
Bang
your mould regularly to remove any air bubbles
·
Enjoy,
don’t panic and make sure to show us the photos!
This short
video shows exactly how you do the Hanger Swirl Technique on Cold Process Soap.
Thank you Celine!!
xo Jo